The Urban Crossover boot is a clean practical style, but built tough with no lack of refinement, for a boot that's made to be worn everywhere, from town to trail.
Using world-class quality full weight leathers and full leather linings gives a combined upper thickness of up to 3mm. The Vibram commando rubber soles are stitched on with waxed thread, and with a base thickness of 6mm and a further tread thickness of 8mm, they're ready for the rough stuff with superb traction, whilst maintaining flexibility from an ideal rubber hardness which works in harmony with the flexible stitchdown construction.
Made in beautiful oiled pull-up leather, this is our most durable leather offering. Full leather lining, and 3mm full grain buffed leather insoles, sitting on Vibram stitched commando rubber soles.
These leathers have a matte finish, and weigh in at a durable 2.2mm thick. Being dyed through, scuffs and scratches blend in with rubbing which redistributes the oils within with no loss of colour. Inside the boot, the heel is lined with full grain reverse kid suede for added heel grip, whilst the rest of the boot gets full grain kip leather lining for a lasting luxurious interior.
EVA mid-sole for shock absorption, and Beechwood shank for arch support.
Also available in these colours: Ember, Pine, Elderberry. Just leave a note during checkout if you wish to change the colour.
Please use the table below as a guide. To measure foot length, you need a flat surface adjacent to a vertical plane such as a wall or cupboard. Place a ruler on the ground and butt it up against the wall, then stand next to it with your heel pushed against the same wall and take the measurement to the tip of your toe. You are looking for the longest measurement, so this might not always be at your big toe.
Alternatively, place a sheet of paper on the ground and butted up to the wall as above, stand on it with your heel against the same wall, and mark with a pencil around your longest toe. Hold the pencil at a slight angle to get the nib closer in to your toe to take account for the thickness of the pencil. Take care not to draw your line underneath your toe, giving a false measurement. Next, measure the length from the heel end of your paper to the pencil line.
Our lasts run true to size according to Standard Last Length measurements. If you are unsure which size to choose after taking your measurement, contact us and we will compare you measurement to our lasts for the most suitable size.
Looking at the table below, we give the shoe inside length by size. You want your foot length to be between 10-15mm under this measurement. If you prefer a little extra width for your little toe, choose a size closest to your foot length + 15mm.
|Shoe inside length (mm)||241||246||250||254||258||262||267||271||275||279||284||288||292||296||301||305||309||313||318|
|Suggested Foot length (mm)||226||231||235||239||243||247||252||256||260||264||269||273||277||281||286||290||294||298||303|
|GX||Standard - Wide|
All of our shoes are 'G' fitting as standard. Please get in touch if you require a different width fitting and we can make it.